CONFIG_EEPROM_EE1004: SPD EEPROMs on DDR4 memory modules

General informations

The Linux kernel configuration item CONFIG_EEPROM_EE1004 has multiple definitions:

The configuration item CONFIG_EEPROM_EE1004:

Enable this driver to get read support to SPD EEPROMs following the JEDEC EE1004 standard. These are typically found on DDR4 SDRAM memory modules.

This driver can also be built as a module. If so, the module will be called ee1004.

The configuration item CONFIG_EEPROM_EE1004:

Enable this driver to get read support to SPD EEPROMs following the JEDEC EE1004 standard. These are typically found on DDR4 SDRAM memory modules.

This driver can also be built as a module. If so, the module will be called ee1004.

Raw data from LKDDb:

lkddb i2c "ee1004" : CONFIG_EEPROM_EE1004 : drivers/misc/eeprom/ee1004.c # in 4.20, 5.0–5.19, 6.0–6.19, 7.0–7.2
lkddb i2c "ee1004" : CONFIG_EEPROM_EE1004 CONFIG_NVMEM : drivers/nvmem/ee1004.c # in 7.3-rc+HEAD
lkddb module ee1004 CONFIG_EEPROM_EE1004 : drivers/misc/eeprom/Kconfig : "SPD EEPROMs on DDR4 memory modules" # in 4.20, 5.0–5.19, 6.0–6.19, 7.0–7.2
lkddb module ee1004 CONFIG_EEPROM_EE1004 : drivers/nvmem/Kconfig : "SPD EEPROMs on DDR4 memory modules" # in 7.3-rc+HEAD

This page is automaticly generated with free (libre, open) software lkddb(see lkddb-sources).

The data is retrived from:

Custom Search

Popular queries:

Automatically generated (in year 2026). See also LKDDb sources on GitLab