CONFIG_I2C_PNX: I2C bus support for Philips PNX and NXP LPC targets

General informations

The Linux kernel configuration item CONFIG_I2C_PNX has multiple definitions:

The configuration item CONFIG_I2C_PNX:

prompt: I2C bus support for Philips PNX and NXP LPC targets
type: tristate
depends on: CONFIG_ARCH_LPC32XX || CONFIG_COMPILE_TEST
defined in drivers/i2c/busses/Kconfig
found in Linux kernels: 2.6.36–2.6.39, 3.0–3.19, 4.0–4.20, 5.0–5.19, 6.0–6.17, 6.18-rc+HEAD
modules built: i2c-pnx

This driver supports the Philips IP3204 I2C IP block master and/or slave controller

This driver can also be built as a module. If so, the module will be called i2c-pnx.

The configuration item CONFIG_I2C_PNX:

This driver supports the Philips IP3204 I2C IP block master and/or slave controller

This driver can also be built as a module. If so, the module will be called i2c-pnx.

Raw data from LKDDb:

lkddb module i2c-pnx CONFIG_I2C_PNX : drivers/i2c/busses/Kconfig : "I2C bus support for Philips PNX and NXP LPC targets" # in 2.6.20–2.6.39, 3.0–3.19, 4.0–4.20, 5.0–5.19, 6.0–6.17, 6.18-rc+HEAD
lkddb of "" "" "nxp,pnx-i2c" : CONFIG_I2C_PNX : drivers/i2c/busses/i2c-pnx.c # in 3.5–3.19, 4.0–4.20, 5.0–5.19, 6.0–6.17, 6.18-rc+HEAD
lkddb platform "pnx-i2c" : CONFIG_I2C CONFIG_I2C_PNX : drivers/i2c/busses/i2c-pnx.c # in 2.6.20–2.6.21
lkddb platform "pnx-i2c" : CONFIG_I2C_PNX : drivers/i2c/busses/i2c-pnx.c # in 2.6.22–2.6.39, 3.0–3.19, 4.0–4.20, 5.0–5.19, 6.0–6.17, 6.18-rc+HEAD

This page is automaticly generated with free (libre, open) software lkddb(see lkddb-sources).

The data is retrived from:

Custom Search

Popular queries:

Automatically generated (in year 2025). See also LKDDb sources on GitLab