CONFIG_SERIAL_CLPS711X: CLPS711X serial port support

General informations

The Linux kernel configuration item CONFIG_SERIAL_CLPS711X has multiple definitions:

The configuration item CONFIG_SERIAL_CLPS711X:

prompt: CLPS711X serial port support
type: tristate
depends on: CONFIG_ARCH_CLPS711X || CONFIG_COMPILE_TEST
defined in drivers/tty/serial/Kconfig
found in Linux kernels: 2.6.38–2.6.39, 3.0–3.19, 4.0–4.20, 5.0–5.19, 6.0–6.17, 6.18-rc+HEAD
modules built: clps711x, clps711x

This enables the driver for the on-chip UARTs of the Cirrus Logic EP711x/EP721x/EP731x processors.

The configuration item CONFIG_SERIAL_CLPS711X:

::: To be written :::

Raw data from LKDDb:

lkddb module clps711x CONFIG_SERIAL_CLPS711X : drivers/serial/Kconfig : "CLPS711X serial port support" # in 2.5.45–2.5.75, 2.6.0–2.6.37
lkddb module clps711x CONFIG_SERIAL_CLPS711X : drivers/tty/serial/Kconfig : "CLPS711X serial port support" # in 2.6.38–2.6.39, 3.0–3.19, 4.0–4.20, 5.0–5.19, 6.0–6.17, 6.18-rc+HEAD
lkddb of "" "" "cirrus,clps711x-uart" : CONFIG_SERIAL_CLPS711X : drivers/tty/serial/clps711x.c # in 3.14–3.19, 4.0–4.7
lkddb of "" "" "cirrus,ep7209-uart" : CONFIG_SERIAL_CLPS711X : drivers/tty/serial/clps711x.c # in 4.8–4.20, 5.0–5.19, 6.0–6.17, 6.18-rc+HEAD
lkddb platform "clps711x-uart" : CONFIG_SERIAL_CLPS711X : drivers/tty/serial/clps711x.c # in 3.14–3.19, 4.0–4.20, 5.0–5.19, 6.0–6.17, 6.18-rc+HEAD
lkddb platform "uart-clps711x" : CONFIG_SERIAL_CLPS711X : drivers/tty/serial/clps711x.c # in 3.8–3.13

This page is automaticly generated with free (libre, open) software lkddb(see lkddb-sources).

The data is retrived from:

Custom Search

Popular queries:

Automatically generated (in year 2025). See also LKDDb sources on GitLab